Project Information
Building Characteristics
Aesthetic Options
Lighting Options
Mechanical Options
Generate Documents
With the Architectural Toolbox, you can obtain customized CAD drawings and a building specification for your project based on the TransitMaster 120 Escalator. You can also send a direct inquiry to KONE to obtain further information or a quotation.

All drawings are intended for preliminary planning only. Do not use these for construction purposes. Contact KONE to receive accurate drawings.
Country*
Please select a Country.
The following project information is optional but recommended as it will be shown in the title block of the CAD drawing.
Project Name
Building Location (City)
Requester Name
 
Design Documents
Which design documents do you require?
CAD drawingCAD drawing and building specification (additional questions apply)
Please select the Dimensions Format
MetricImperial
Continue »
These selections are required to generate a CAD drawing.
Code Compliance
EN115-1:2008 +A1:2010EN115:1995
 
Vertical Rise
millimeters
ft in
Vertical Rise is not a valid number.
Vertical Rise is less than the acceptable range.
Vertical Rise is greater than the acceptable range.
 
Inclination
KONE infrastructure escalators are available with two angles of inclination: 27.3° and 30°.

27.3° inclination
  • The normal angle for a staircase
  • Ideal when the escalator is installed adjacent to a staircase as it provides a good alignment between the escalator truss and the staircase
  • Recommended for infrastructure escalators

30° inclination
  • This popular inclination offers a good compromise between passenger comfort, safety and the overall length of the escalator
  • Used in both commercial and infrastructure applications

If other inclinations are required, please contact the local KONE sales representative.
Inclination
27.3°30°
 
Drive
Worm gear transmission is characterized by low noise, stable transmission and good vibration damping.

Helical gear transmission is characterized by the ability to transmit high torques in a very small space. It has a higher efficiency than worm gear transmission even at low speeds. At higher speeds it does produce higher noise levels than worm gear transmission.
Drive
Worm gearHelical gear
 
Horizontal Steps
34
 
Speed
0.4 m/s0.5 m/s0.65 m/s0.75 m/s1.31 ft/s1.64 ft/s2.13 ft/s2.46 ft/s
 
Transition Radii
1.5/1.0 refers to a transition radius of 1.5 at the top and 1.0 at the bottom. Please also note that the choice of transition radii is linked to inclination, speeds and the number of horizontal steps.
Transition Radii
1.5/1.02.7/2.0
 
Step Width
Infrastructure escalators are generally available in three step widths: 600, 800 and 1000 mm.

800 mm step width
  • Allows one adult passenger and a small child, or one adult passenger with shopping bags or luggage (i.e. 1.5 passengers) to stand on each step
  • Suitable for medium or low usage installations, such as shops

1000 mm step width
  • Allows two adult passengers to stand on each step
  • Maximizes transport capacity for high usage installations such as large department stores, shopping malls, airports and railway stations
Step Width
800 mm1000 mm32"40"
 
Arrangement
SingleParallel 2 unitsParallel 3 unitsParallel 4 unitsCriss cross
 
Power Supply
(frequency, motor, lighting supply)
50Hz, 380V, 220V50Hz, 400V, 230V50Hz, 415V, 240V60Hz, 380V, 110V
 
Position of the Controller Cabinet
Inside trussOutside truss
 
Intermediate Support or Reinforced Truss
(when required)
When the length of the escalator would result in the truss exceeding the maximum permitted deflection of 1/1000 of the distance between supports, an intermediate support or reinforced truss is required.
If this is the case for your project, which option would be your preference:
Intermediate Truss SupportReinforced Truss
 
Operational Mode
Continuous
The unit is started by a key switch and runs continuously in the selected direction until stopped by a key switch or the emergency stop.
Stop & Go
This mode is the same as Continuous except that the unit stops after a pre-selected time if no passengers are detected. If a passenger is then detected at either landing, the unit restarts in the pre-selected direction.
Stand-by speed
This mode of operation is the same as Stop & Go except that the unit is slowed down to a stand-by speed by the inverter instead of beingstopped. The stand-by speed is approximately 40% of nominal speed, namely 0.2 m/s for an escalator normally operating at 0.5 m/s.
Stop & Go and Stand-by speed
A combination of Stop & Go and Stand-by speed.
Operational Mode
Continuous operationStop & GoStand-by speedStop & Go and Stand-by speed
 
Balustrade Type
Glass balustradeSandwich panel balustradeSolid inclined stainless steel balustrade
 
Balustrade Height
1000 mm1100 mm40"44"
 
Balustrade Extension
None400 mm700 mm16"28"
 
Recommended if a free fall of more than 6m [19' 8"] is possible. The additional barrier has a height of 1300mm [4' 3"].
Passenger Fall Protection Barrier
YesNo
 
Support Type
StandardSeismic (earthquake fixing)
If you require a seismic mounting support, please contact your local KONE representative for details.
 
Side Cladding Options
For safety reasons, it is imperative that all exposed truss sides are fitted with cladding to protect the public from rotating machinery within the escalator. Please only select None if the escalator will be installed between two walls (ie. underground tunnel) and will not have any machinery exposed.
Side Cladding Options
NoneGrey primed sheet steel cladding (RAL7036)Grey powder coated sheet steel cladding (RAL7036)Brushed satin stainless steel claddingGlass side claddingCladding fitted by the customer
 
Soffit Cladding Options
NoneGrey primed sheet steel cladding (RAL7036)Grey powder coated sheet steel cladding (RAL7036)Brushed satin stainless steel cladding
 
 
Continue »
 
Access covers
Stainless steel with punched diamond pattern with black paintStainless steel with punched diamond patternNatural ribbed aluminumRibbed aluminum with black groovesStainless steel with floor number
 
Comb segment materials
AluminumAluminum with yellow coating
 
Balustrade panel configuration
Align with Truss


Align with Floor
Balustrade panel configuration
Balustrade joints perpendicular to the trussEqualised inclined balustrade panel widths with joints perpendicular to the floor
 
Frontplate
Black plasticSatin polished stainless steel
 
Handrail type
C handrailV handrail
 
Handrail colour
BlackBlack with white demarcation insertsRedBlueGreenBrownBeigeGrey
 
Decking
Silver powder coating (RAL 9007)Natural anodized aluminumBrushed stainless steel
 
Center Decking
NoneYes
 
Skirt
Sheet steel skirt with black anti-friction coatingBrushed satin stainless steel skirt with clear anti-friction coating
 
Skirt brush deflector
Silver anodized aluminum with single brushBlack anodized aluminum with single brush
 
Step type
Silver aluminumBlack color aluminum with metal color ribsSilver aluminium MovingMedia stepBlack aluminium MovingMedia stepStainless steelNatural aluminum
 
Step demarcation
NoneYellow painted lines on sides and rear edge (RAL 1004)Yellow painted lines on sides and rear edge with center line (RAL 1004)Yellow plastic inserts on sides and rear edge (RAL 1023)
 
Moving Media step

MovingMedia distribution
One sign on every step, every six steps or as specified by customers
Moving Media step
One sign on every stepOne sign every six stepsCustomised to your needsNone
 
 
Continue »
 
LED Continuous handrail lighting
Only available when Balustrade Type is Glass Balustrade.

Please contact KONE for a custom configuration if necessary.
LED Continuous handrail lighting
NoneYes
 
LED Continuous handrail lighting - Color Selection
WhiteRedYellowGreenBlue
 
LED Comb light
NoneStaticFlashing
 
LED Comb light - Color Selection
WhiteRedYellowGreenBlue
 
Green understep demarcation lighting
NoneYes
 
Skirt lighting
Only available when Balustrade Type is Glass Balustrade.

Please contact KONE for a custom configuration if necessary.
Skirt lighting
NoneSkirt light (White LED Spots)Skirt light (LED Continuous)
 
Skirt lighting - Color Selection
WhiteRedYellowGreenBlue
 
LED soffit spot lighting
Only available with stainless steel or powder coated cladding.
LED soffit spot lighting
NoneOne row (Only white color)Two rows (Only white color)
 
LED Cove lighting
Only available with stainless steel or powder coated cladding.
LED Cove lighting
NoneLED continuous soffit cove lightLED continuous side cladding cove lightLED continuous side & soffit cladding cove light
 
LED Cove lighting - Color Selection
WhiteRedYellowGreenBlueWhiteRedYellowGreenBlueWhiteRedYellowGreenBlue
 
 
Continue »
 
Chain type
Standard chain
Lubricated step chain is standard step chain for escalators . Only the optimum amount of lubricating oil is used to achieve the service life of the chains. A lightly used escalator requires less lubrication than a heavily used one. This minimizes the accumulation of excess oil within the escalator truss and the resulting environmental and fire hazards.

Standard chain with automatic chain lubrication
Automatic step chain lubrication is also available if deemed necessary for commercial reasons.

Lubrication free chain
Lubrication-free step chains do not require regular oil lubrication. Maintenance time is therefore reduced and, as there is no accumulation of oil within the truss, internal truss cleaning requirements are minimal. Options not using regular oil lubrication within the escalator truss resulting cleaner environment and lower fire hazard risk.
Chain type
Standard chainStandard chain with automatic chain lubricationLubrication free chain
 
Operating environment
IndoorSemi outdoorFull outdoor
Please contact KONE for a special configuration.
 
Heating options
YesNo
 
Cooling options
YesNo
 
Controller cabinet protection class
IP21IP54
 
Additional options
Interface to Building management system (BMS)
Diagnostic display
LED Traffic lights
 
 
Continue »
 
Stop Go
You are now ready to generate your documents. Select your output format below and click the button below to proceed.
Please fix the following errors before generating your documents.


CAD Drawing Format
Autodesk DWGAdobe PDF
Specification Format
Adobe PDFMicrosoft Word DOC

N.B. The architectural toolbox is intended for planning purposes only. All CAD drawings, building specifications and 3D models produced using the architectural toolbox are not final construction documents and cannot be used for building or construction purposes. In case you would like to receive a drawing for construction purposes please contact your local KONE organization.